Welcome to Top Trends!

Home tools Buyer's Guides from tech enthusiast who loves technology and clever solutions for better living.

Check Today Price

Best hand planer 2018 – [Buyer’s Guide]

Last Updated November 1, 2018
Share on Facebook0Share on Google+0Pin on Pinterest0Share on StumbleUpon0Tweet about this on Twitter

Norman RyanHi! My name is Norman Ryan. One of the most important sections in the article – the comparison charts for best hand planer in 2018!

In fact, it was the first time I had been in this situation and what I thought was going to be a very quick and easy task turned out to be a good many weeks of research. I hope that my Top 3 list will provide you great options in buying the right fit for you.

Let’s get to it!

Best hand planer of 2018

Simply review and buy them. Here, I will review 3 of the best hand planer of 2018, and we will also discuss the things to consider when looking to purchase one. I hope you will make an informed decision after going through each of them.

I have taken the initiative to educate you on the top three best hand planer that you can buy this year. You must have heard that the best hand planer should allow you to save money, right? Sure, but that’s not the only reason you should consider getting one.

Test Results and Ratings

Rank №1 №2 №3
Product
Total 4.8 4.5 4.3
Design
5 points
5 points
4 points
Materials
5 points
5 points
4 points
Construction
5 points
4 points
4 points
Price
4 points
4 points
5 points
Awards 1
button button button
banner banner banner

 

 

 

 

How to save up to 86%? Here is little trick.

[sociallocker]You must visit the page of sales. Here is the link. If you don’t care about which brand is better, then you can choose the hand planer by the price and buy from the one who will offer the greatest discount.[/sociallocker]

 

 

№1 – VonHaus 7.5 Amp Electric Wood Hand Planer With 3 1/4″ Planing Width and Extra Set of Planer Replacement Blades

 
VonHaus 7.5 Amp Electric Wood Hand Planer With 3 1/4

Pros
POWERFUL: 7.5 Amp professional hand planer – ideal for woodworking, fixing doors, fitting wood and correcting splinters, chips and misshapen edges
IMPRESSIVE CUTTING SPEED: 33,000 cuts per minute speed, 3 ¼” cutting width, 0 – 1/16” planing capacity, 16,000 drum speed
Cons
Not found yet.
 
Total:
4.8

Why did this hand planer win the first place?

I don’t know anything about other models from this brand, but I am fully satisfied with this product. I was completely satisfied with the price. Its counterparts in this price range are way worse. I really enjoy the design. It is compact, comfortable and reliable. And it looks amazing! The product is very strong. Its material is stable and doesn’t crack.

banner2


Design
5

5star

Materials
5

5star

Construction
5

5star

Price
4

4star

 

 

№2 – WEN 6530 6-Amp Electric Hand Planer

 
WEN 6530 6-Amp Electric Hand Planer

Pros
6-amp motor provides up to 34,000 cuts per minute
16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches
Make rabbets up to 7/10 inch in size with the included rabbeting guide
Cons
A little bit heavy.
Can require care/upkeep.
 
Total:
4.5

Why did this hand planer come in second place?

The material is pretty strong and easy to wash if needed. I recommend you to consider buying this model, it definitely worth its money. Managers explained me all the details about the product range, price, and delivery. This is a pretty decent product that perfectly fitted the interior of our office.

banner2


Design
5

5star

Materials
5

5star

Construction
4

4star

Price
4

4star

 

 

№3 – Stanley 12-404 No. 4 Adjustable Bench Plane with 2-Inch Cutter

 
Stanley 12-404 No. 4 Adjustable Bench Plane with 2-Inch Cutter

Pros
9-3/4-inch adjustable bench plane with a 2-inch cutter
Hardened, tempered steel gives precision-ground cutter edge durability
Gray, cast-iron base with precision-ground sides and bottom; durable epoxy coating provides long-lasting protection
Cons
Quality control seems to be an issue.
The large size.
 
Total:
4.3

Why did this hand planer take third place?

It doesn’t squeaks nor bents. Looks great in my apartment. A very convenient model. It is affordable and made of high-quality materials. It is inconvenient to use due to the size. I am going to get something different next time. I liked the design. We’ve been using it for 2 months and it still looks like brand new.

banner2


Design
4

4star

Materials
4

4star

Construction
4

4star

Price
5

5star

 

 

hand planer Buyer’s Guide

If you keep the before points in mind, you can easily go out to the market and buy hand planer, right? No!

Makes a lot of wood chip mess

Dewalt really considered lifetime vs price in this model. The replaceable knives are a nice touch. However, because it is heavy duty it can be quite heavy.

The DeWalt 1inch two speed planer truly is a power planer. This planer has three knives, a powerful motor, and can handle larger pieces of wood than smaller planers.

The 15-amp motor runs at 20,000 RMPs. It features a 2-speed gear box, letting you set the feed speed at either 9or 17CPI. This allows for greater exactness in your woodworking.

This model also includes a fan-assisted chip ejection vacuum. Chips and sawdust are vacuumed off the cutter-head and ejected from the machine.

This planer has a very wide base: 1¾ inches, nearly twice the width of the standard inch base on most planers. This provides a more rigid base, which helps reduce snipe, as does the automatic carriage lock.

The DW735X also includes a material removal gauge, an extra-large thickness scale and an extra-large turret depth. This set comes with infeed and outfeed tables and an extra set of knives for the cutter-head.

Dimensional Specifications

How thick a board do you want to be able to plane? How thin do you want your planer to be able to go? If you are looking to plane thick boards, you will likely need to invest in a larger machine.

Planers are precision instruments that shave wood off millimeters at a time. Make sure that the planer you buy can handle the wood you want to work.

If you want to make a large table top, you may need to get a jointer planer and join the pieces together after they are planed.

Stroke Count

Stroke count is determined by the speed of the knives. Having more blades can also increase the stroke count. Some planers have variable speeds, which would allow you to diversify your work.

Different woods work best with different stroke counts. Depending on whether you use soft or hard woods, you may need higher or lower stroke counts.

Grooves in the base plate allow you make chamfers.

They is a dust bag, but like all dust bags on power tools it can be hard to use in many situations. A face-mask is always recommended.

This is the kind of planer I would use to trim down windows that were sticking and hard to open or close. It is lightweight and rugged but not so powerful that you cannot use it with one hand (with practice).

With the working edge facing up, examine the side of the board to see which way the grain rises (in this photo, it slopes up toward the right) and plane in that direction. If the grain tears out, try planing in the opposite direction or skewing the plane diagonally as you push.

Jointer

At 2inches or longer, the jointer is the largest bench plane and the best choice for trimming, squaring, and straightening the edges of doors or long boards.

Before power planers, a jack plane smoothed and squared rough lumber. Good for truing long boards and removing warp or twist. At 1to 1inches, it’s more versatile than the larger jointer plane.

Designed to flatten and smooth the face of a board, this 9- to 10-inch-long plane is ideal for leveling off high spots and for general planing. The best all-around bench plane if you have only one.

Planing a long edge

Apply even pressure with both hands, pushing down on the front knob and forward with the rear handle. To make the cut easier, skew the plane so that diagonally opposite corners of the bottom, or sole, are aligned on the same edge. Periodically check the edge with a square, adjusting the blade laterally if you’re off.

Maintenance after the work is done

Once you are done with your work, make sure to remove all the small pieces of woods and dust from your workplace. Then cover up your machine. And if you are going to put it away for a longer time, put it in the box and store it in a secured place.

Cord Length

The longer the cord, obviously the better reach you will have in your shop. But conversely, if you have to put the tool away or pack it in a work truck often, you will have to coil or wind up that long cord each time. Makita is adjudged the frontrunner with cords, but then, this is just the opinion of some carpenters.

Chip Direction

For maximum efficiency and versatility, you need to buy a machine that offers options for either left or right chip direction. This determines either dust bag or hose location depending on the job. But where you have no plan to use dust hose or bag, a good choice is a model with a chip chute which you can slant away from you.

Speed of the Blade

The speed of the blade is important. Some machines have the availability of adjustable blade speed. Others have only one speed. Some operators prefer to set the speed by themselves.

Two, three, and five knives are available in the planer cutters. The more blades and the faster the blade speed, the more strokes the blade will deliver, and the smoother and refined the cut will be.

There are different rates of powers are coming out of the wall. A standard jack will pull 1volts alternating currents in the United States. A standard outlet will pull out 220 volts of alternating current in Europe and the rest of the world.

So, you should check the electrical specifications and ensure the equipment is meant to be run on that power coming out of the wall. If there is a mismatch, you will be able to solve the issue by purchasing a converter.

Three guiding principles

And so it is with tools. Mediocre tools are inherently limited in the results they can produce. An excellent tool allows you to expand your ability without limits, even if sometimes for the sake of economy you have to alter your approach to a project.

Main Features

Despite the affordability the 6530 is engineered to be portable and it’s one of the most lightweight designs on the market. This means you’ll gain more control over the machine and it’s almost impossible to lose your grip/slip because you have a firm grip over the whole body. The small design effectively lowers fatigue and makes it usable for extended periods without overheating. The combined performance options, extremely low price tag, included accessories and durability make this the most cost-effective hand planer on the market.

You’ll notice it’s one of the best looking contemporary planers and WEN went as far as to include accessories in the form of a f ust bag. You can use this bag as a complimentary item to help you store away your wood shavings. It will help you organize your working space rather than having wood residue spilling all over the place.

How We Process Wood

When wood is moisture-free it’s either sold in individual pieces to professional woodworkers or ran through industrial-grade planers. These industrial planers are more expensive and don’t offer nearly the same hands-on work experience that hand planers do. If you buy a simple board at your local hardware store, chances are it was made using industrial-grade planing. It’s worth noting that industrial planers are the most advanced and they are capable of turning the roughest trees into perfect x pieces.

The wood is then sold off to craftsmen and furniture/construction companies. People need different sized woods for different ventures and there are varying planers available which can be used for different applications. The most widely used and best-selling planers are electric planers because they offer a hands-on work experience and they are very effective at penetrating deep inside the wood surface. They are also affordable and a great investment even for households who rarely use them.

Jointers

Jointers are not technically planers and we have not included them in this category. The only reason I mention them is that they are similar in function. However, the main use of jointers is for edges of boards, whereas planers are used for the surface. When joining a number of boards together, such as for making a table top, the edges of the boards are usually run through a jointer, to ensure that they are straight, flat and smooth.

Motor Power

The amount of power that the motor provides is an important factor, as a more powerful motor will allow you to take thicker cuts with the tool. This is especially important when working with dense hardwoods, such as oak or maple.

Other than that, the most important part of any planer is the blade or blades. The more blades they have, the smoother a cut they will provide. Blade geometry is important as well, as a spiral cut will make for smoother finish.

Depth Adjustment

All planers have a depth adjustment on them. The ease of use and accuracy of this adjustment is important for ensuring that the work comes out as intended. The depth adjustment must lock in place, to prevent it from migrating during the cut.

Control

A hand planer is a small device which is powerful and if not handled well can cause grievous harm to the user and other people nearby.

To address this issue, different manufacturers of different brands of hand planers have devised new methods of sorting this. Some hand planers have safety mechanisms such as locks and barriers protecting the blade from coming to contact with other things which are not being cut.

There is also a way the speed at which the machine works can be controlled by the user. This is also important ensure you check it before buying a hand planer.

Price is the common uniting factor across the board. Now that we know hand planers are a bit inexpensive, it is advisable a customer settles for what they are comfortable with financially but still well performing.

This can be made possible by forum shopping before settling on one hand planer. Get to compare the prices, features, advantages and disadvantages. Choose one that fits your desired hand planer.

The Maker

3.  may have a brand name that tools are known by. Some use this name.

4.  may or may not sign blades with trade name, brand name, or given name.

may make dozens of types of tools ranging from knives to plane blades or may specialize in just a few types of tools (ie, chisels or saws).

The Materials

The best oak is well aged. Good plane dai’s are rough cut and stored for years before being used. The grain is straight and the grain orientation is a critical factor in assessing quality. Knots, irregularities, and runout weaken the dai or other tool parts. See the examples further on.

Blade vocabulary note: ura –  the hollow ground back of a plane or chisel blade. This is ground in the hagane to make sharpening the hard steel easier.

At 600X just to rub it in.

No self-respecting toolmaker would produce something like this. Inclusions are an indication of poor quality materials or improper handling of them. Fact  is, it is worthless for producing a decent planed finish – probably at any point during it’s lifetime.

Here is a good blade of similar size. Hagane should be flawless.

Grain is perfectly straight.

Red line is just below a crack the length of the handle.

Financing Your Dream

Few of us can afford to buy an airplane with cash. Even if we could, there are tax and other benefits we can realize by financing the purchase instead. The problem is that few airplane buyers understand the nuances of aircraft financing, let alone the process itself.

When buying an airplane or helicopter, the biggest factor in financing isn’t whether the aircraft is new or used, but the amount financed. “Basically,” notes Haney, “the more you borrow, the lower the interest rate. It doesn’t matter if the airplane is new or used.” Buyers should know that “used” is more correctly termed “recently used,” since mainstream finance companies won’t lend on aircraft that are too old.

Putting It All Together

An informed, prepared buyer and a motivated, honest seller are the dream combination in the airplane market. Whether you’re considering a brand-new factory airplane, a certified LSA or a gently used airplane, following a checklist of sorts in your quest will help you sleep better once the papers are signed and the keys are in your hand. “Off-the-cuff” buying decisions, shopping “till it feels right” and “letting the airplane find me” all sound good on paper, but are sure ways to experience regret after making a buying decision.

Arm yourself as you would in any battle. Prepare, learn and have everything ready so that when the perfect airplane does appear, you’ll be ready to make the decision quickly enough to get a great deal. Purchasing an airplane is one of the most significant decisions you’ll make as a pilot. The Boy Scouts had it correct when they created their motto—one that applies equally well to buying an airplane: Be prepared.

Your Project

You may wish to consider the job you’ll be using your block plane for. Typically, block planes are ideal for small jobs that other tools may be too large or awkward for. Smoothing end grains, chamfering, smoothing board edges and other similar tasks are ideal for block planes. Whichever of the best manual hand planer you choose should allow you to quickly and efficiently perform these small woodworking tasks. Block planes are not ideal for larger jobs.

This consideration is mainly for comfort as well as efficiency. The block plane you choose to use should be small enough to hold comfortably in one hand and operate efficiently. For block planes, small is good! It should also be lightweight but still sturdy enough to glide over wood and shave it down to whatever level you desire.

Sharpen your shop pencil

You can tighten miters by trimming the excess part with a sharp block plane. Begin from the short side to the long side as this helps to prevent planing against the grain. Angle the plane to slightly target the backside of the miter to ensure that the face of the miter fits fine.

Shape rounded edges

Round off corners and ease edges by use of the block plane. You need to set the plane for a light cut and make the initial pass at a 45-degree angle to assist in shaping the board. Then make a few passes on either side at 22½ degrees. Keep doing it until you achieve the desired results. You may use sandpaper to smooth out the curve.

Trim a proud dovetail and tenon joint

A ‘proud’ joint here refers to parts of the joint that have been stuck out slightly after assembly. Typically, this is not a mistake, but just a way to ensure that the parts fit perfectly after running a few block plane passes over them. ​For the past decades, more and more woodworkers have been introducing power jointers and planners into the shops, and this has seen some hand planes pushed into dusty corners. But a block plane still remains to be one of the handiest hand planes for a majority of woodworking activities.

Assume the Right Position

A block plane is a one-handed tool, and therefore, you can use it almost anywhere. However, before you try using it in a cramped space or on a ladder, familiarize yourself with the tool and seize the workpiece firmly in a stable place.

Ensure you assume a balanced stance when using a block plane with the plane held firmly with one hand, and the workpiece in the other.

To make your work easier, work on your wooden surface horizontally or downhill. Trying to plane upward can be harder for beginners.

Apply the Ideal Force

To remove thin surfaces of the wood, you should plane lightly over your wooden surface. You don’t need to apply a lot of force using your dominant hand to smoothen your surface. This amount of force is applied when removing a small flawed area on your workpiece. To quickly skin the wood or remove a rough surface, apply a stronger force. Pressure should come from your main hand while the other should only be used to steer the plane in place.

A block plane is a useful tool that you will need in almost all your woodworking projects. It is a tool that you you will often use from the start of a project till the end. You use it to create a flawless surface or skin wooden surfaces. It also gives woodworking projects a great finishing by removing any irregular surfaces that may prevent easy application of paint or varnish.

Using a block plane in the right manner takes time, and you need a lot of practice to master it. However, with the above techniques and tips, you will find it easier to do a professional job. It serves as a basic woodworking tool that any beginner woodworker need to learn how to use.

Easy To Use

An electric planer is a breeze to use. Just turn it on and run it across! Although it would take proper balancing and pacing, the concept surrounding the steps on how to use a planer is very easy to grasp.

The other things that you should be taking care of when using the planer would come out naturally, so you don’t need to be conscious of everything at the same time.

Produces Uniform Results

Because it is motorized, electric planers almost often produce the same results for as long as they are properly used. This is helpful as working with uneven or even differently-sized wood surfaces would be much more. It would be difficult and would most often require further processing.

While this may be dependent still on the user, knowing how to use a planer properly can often guarantee uniformity in the results produced.

Set Up Your Materials And Tools

First thing is to know about how to use a planer is to have your entire stuff ready in your workstation. Proper setting up smoothens out the entire process and can even make it faster.

Make sure that the wood surfaces that you will be working on are properly secured and balanced. These steps will ensure that you will get a fine and even cut.

Repeat As Many Times As Necessary

Running your planer once won’t usually be enough unless you are already applying finishing touches. You may need to run it several times in order to achieve the desired results.

Remember to keep tabs on your runs, especially when working with a number of wood surfaces, in order to produce uniform results across all of them. Also don’t forget to be mindful of the other steps on how to use a planer when making repeat runs.

Proper Maintenance

Make sure that the blades are also properly mounted whenever you take them out for replacement or sharpening. This is done in order to avoid causing damage both to the tool and your wood surfaces.

As with knowing how to use a planer, knowing how to maintain it is a must for a longer useful life.

Secure And Organize Your Workstation

While it is a good idea to have everything you need in front of yourself when you start your project, it is likewise important to have all these stuff properly arranged and secured and this is an important aspect in knowing how to use a planer.

Little trinkets that are unsecured can get in the way and can be just accidents waiting to happen if left lying around. Securing your wood is also necessary as you don’t want yourself slipping through it while holding a mechanical rotating blade that is turned on.

Always Be Careful

Handle the planer with care to avoid accidents and injuries. Improper use of the planer can produce disastrous results. They are also not objects to be played with.

Rotating blades and soft fingers are not an ideal combination. Prevention is always better than the cure and this knowing how to use a planer is not different.

The DW73planer has a 15amp powerful motor, making it easy to make deep cuts even in hardwoods. The powerful motor ensures all cuts you make are clean. Also, the motor features a dual speed gearbox, which gives 9or 17cuts in every inch, and a three-knife cutter -head that works at 10,000rpm. To get finer finishes, use 17cuts per inch and 9cuts per inch to dimension material.

Knife system

The planner has an easy to change knife system composed of dual edge knives that are disposable. The system enables you to change the knives with ease, with the help of the alignment jigs.

The Makita 12-inch planer is highly portable, and has a sturdy design, that makes it operate quietly. Also, the planer has blades that are easier to change. The unique automated interna-lok head clamp enhances the planning performance of the planer by eliminating snipe. In addition, the device has LED light that indicates when you plug in your planer to power source, and a fully adjustable depth to enhance repeated cuts. The design of the planer has a 1amp motor, which works at 8,500 rpm. The cutting capacity of the tool is 1/inches in depth and a width of 1inches.

Sturdy design

The planer is designed with four posts and diagonal cross supporters, to offer maximum stability. Also, it has large extension tables, to provide support to your work piece, as well as entirely adjustable depth that enhances repeated cuts. Additionally, the feed rate of the tool is 28ft per minute, and the cutting depth setting is easily adjustable, to provide the highest level of precision. The design makes it suitable for finish woodwork, furniture, staircase, closets and cabinets.

Easy to use features

For ease of transportation, the Makita planer has a compact design with lightweight. The 2012NB planer uses planer blades that are double-edged and disposable, thus easier and faster to change. LED light is featured to indicate when the planer is plugged into power source, and there is an easy to operate large paddle on and off switch. For ease of standard equipment storage, a detachable tool box is featured. Additionally, you can connect a dust collection system with the help of the optional dust hood.

The 2012NB Makita planer features an automated interna-lok head clamp, which improves the productivity of the tool by eliminating snipe, leading to enhanced planning performance.

Disposable knives

Three razor sharp knives are featured, to provide convenience. The knives are reversible, disposable and lasts longer than traditional knives. You can easily change the knives, and they remain sharp for long. Therefore, no wastage of time and money in re-sharpen the knives regularly.

Additional features

The planer has additional features that make it easy to use. Among them are the extra-long out-feed and in-feed tables, giving support to your materials. There is a turret depth stop, which allows you to easily set the machine when using common depths. Also, there is an extra-large thickness scale and material removal gauge, to aid in ensuring all pass are accurate.

Powerful 1amp motor

The planer has a powerful 1Amp motor using 120V to work. The motor gives high power, thus the process of operation is continuous, and sufficient to handle hardwoods. Additionally, the powerful motor makes the planer suitable for multi-purpose.

Kreg Pocket Hole Jig

The Thickness Planer with Three Knife Cutter-Head is powered by a 1Amp motor for managing large, deep cuts in hardwood. Three-knife cutter head with speed of rpm provides 9cuts per inch, delivering one of the finest finishes of any portable planer.

Product Features in Brief

PORTER-CABLE hand planer is operated with powerful amp motor to allow you to cut the hard materials smoothly and quietly. It comes with 11.5-inch cast aluminum shoes to provide the better finish output quality. Moreover, it features dual side dust extraction for fast and effective removal of all dust from cutting, making your work area clean. The over-mold depth knob for positive steps is designed perfectly for the multiple depth control. In addition, 43-inch max rabbit depth enables you to remove more materials per pass easily. Some useful materials are included: carbide cutting blades, wrench, dust bag, and kit bag. Last but not least, this product will be backed with 3-year limited warranty to ensure its high quality.

How users are satisfied with this item

To the reviews customers have made over this product, the majority of them is extremely happy. Specifically, a user has mentioned their satisfaction over the fact that this planer could help them slide the wood quite smoothly and silently.  Another user added that this planner is impressive to them, and they have also ordered the second one to help with their construction trades. In the meantime, a few other users have mentioned about the good handle design of this planer. They added that it is convenient and easy to hold and shave off the work.

What users think need to improve for this item

In contrast, there are some feedback we have seen from customers as well for the improvement of this hand planer. For one, it is about the storage. Some users still think it is a bit smaller than what is needed. With bigger size, it could store more and make it a lot easier for the work. Another issue is the knob resting. A user found it impossible to rest the knob, and he simply could not measure the depth of his cutting.

Not thats not right.

The knife utilized in the DW73is razor sharp. This knife is not only sharp, but also reversible, providing a 30 percent longer lifespan than other brands. You cannot sharpen the knives after they become dull, but this is fairly general with planer knives.

Once the knife is dulled beyond use, you will need to replace it with a new one. The change-out will be extremely easy, since the knife has holes that fit directly on the cutter-head. This design will eliminate errors and ensure a quick and easy removal and installation process.

Extra-Long Outfeed And Infeed

This planer provides 33-1/2” of material support, thanks to the extra-long outfeed and infeed. To reduce the time needed to set the machine at commonly used depths, a turret depth stop is utilized. The planer offers a depth capacity of 6”, width capacity of 12-1/2” and maximum cut depth of 1/8”.

Noise and Sounds

Before spending much cash on a new tool, you should try to see that tool in action. After our comprehensive thickness planer reviews, we found that professional and commercial wood working shops do not create noise because they do not feel much sounds produced by such machines as we feel. While disturbance may not hassle you, those sounds can hassle other people. A hand-held power planer will make more disturbance than a benchtop design does. The issue with a power planer is that it may not have the strength you need to plane down bigger or heavier wood. Power planers may not work efficiently with certain kinds of wood either.

Other factors you must consider are the motor in that planer and its overall dimension. Many cheaper models have a universal motor, and while these motors are light, convenient, and effective, those motors do not do well when used with harder wood. You might choose an induction motor according to the basis of your workshop. Though these motors are heavier than other motors but an induction motor will definitely, work more efficiently on any type of wood you use.

As you go shopping for planers, and not be able to remember the point in the dimensions of each design. If you have only a little surface available, a hand-held power planer or a combo joint planer is a wise decision. Benchtop and other bigger models will take up more surface but work with more tasks and will last a longer period too. Looking at all these planers as you store can help you find the right one for all your tasks.

Your Project

This consideration is mainly for comfort as well as efficiency. The block plane you choose to use should be small enough to hold comfortably in one hand and operate efficiently. For block planes, small is good! It should also be lightweight but still sturdy enough to glide over wood and shave it down to whatever level you desire.

First Impression

The PORTER-CABLE Hand Planer is the same size as my existing, older planer but was lighter and more comfortable in my hands.

The planer features a AMP motor with 16,500 RPM and is designed for applications which include planning wood doors, planks, rafters and joists, as well as, chamfering or profiling edges.   It has the ability and power to cut a 5/64” cut in one pass.

At first glance I immediately noticed the PORTER-CABLE Hand Planer has easy to read and use controls, and a really comfortable, over molded ergonomic grip to reduce vibration.

Dust Extraction

This lever is a huge advancement and allows the user the flexibility to hold the planer in any position and still be able to collect dust.  My old planer had only one port which meant on some applications my face and eyes were showered in saw dust and debris.

The dust extraction ports are vacuum compatible, and come with an adaptor to connect to most job site vacuum hoses.  The vac adapter fit both my HEPA and Ridgid vac hoses.

Kickstand

Another really nice and long overdue feature is the kickstand.   The kickstand is a small, spring-loaded foot near the back end of the tool that drops down automatically whenever the tool is lifted off the work surface. The kickstand provides clearance for the blade to spin freely, allowing you to put the tool down with the blade still turning and not gouge your work surface.

Watch out for the presses steel frogs. You want your planes to have a real frog.

Next, look for cracks and breaks, Cracks and breaks can hide under the dirt and grime on a plane. Look it over closely. You don’t want any signs of a crack or break unless the plane is cheap enough and you don’t mind finding a replacement part. The problem being, sometimes the replacement part will run more than the plane itself.

Some common areas are on the sides and around the mouth. You’ll also see chips out of the side on a lot of planes. The common chip out of the front or back doesn’t effect performance and will not hurt anything except the overall value of the plane.

Holes and pitting are another are to look out for. They usually will not hurt the performance, but will have an effect on the resale value.

Another good quality indicator is the lateral adjuster. The better planes had better lateral adjuster.

These first two images just show a Stanley/Bailey and a Sargent plane as an example of the heavier lateral.

If you look through either the Stanley Types or the Sargent Types you will see what a nice lever cap looks like.

Any of these, I would avoid. The pressed steel cap, or cheesy almost plastic type caps.

Knob and Totes

Rosewood is the most common for the better planes. Several hardwoods were also used. Mahogany was also used quit a bit. Sargent and Union both used mahogany extensively.

I’ve been finding, restoring and collecting hand planes for over years. It started with a few and just grew. I love the history, the research and writing what I find.

Chip ejection system

The Delta Power tools planner comprises of a powerful 15A motor that makes 18,000 cuts in a minute. The planner is designed with four columns for maximum stability, thus precise and smooth planning when in use. The knife system features dual edge disposable knives, allow you to change knives with the help of the alignment jigs. The in-feed and out- feed tables are adjustable, thus reducing snipe while supporting long pieces. In addition, the planner features a reversible dust port, which enables you to collect chips on either side of the planner.

 

 

 

 

How to save up to 86%? Here is little trick.

You must visit the page of sales. Here is the link. If you don’t care about which brand is better, then you can choose the hand planer by the price and buy from the one who will offer the greatest discount.

 

 

Final Word

First of all thanks for reading my article to the end! I hope you find my reviews listed here useful and that it allows you to make a proper comparison of what is best to fit your needs and budget. Don’t be afraid to try more than one product if your first pick doesn’t do the trick.

Most important, have fun and choose your hand planer wisely! Good luck!

So, TOP3 of hand planer

 

 

Questions? Leave a comment below!

Chatting about hand planer is my passion! Leave me a question in the comments, I answer each and every one and would love to get to know you better!



Leave a comment!

Let us know what you have to say:

RECENTLY REVIEWED

Best folding hand truck 2018 – [Buyer’s Guide]
Best chalk markers 2018 – [Buyer’s Guide]
Best space bags 2018 – [Buyer’s Guide]
Best punching bags 2018 – [Buyer’s Guide]
Best storage sheds 2018 – [Buyer’s Guide]


AFFILIATE DISCLOSURE

Some posts may contain affiliate links. lab-50.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
FOLLOW US

       
 
COPYRIGHT © 2017 · lab-50.com · ALL RIGHTS RESERVED
DMCA.com Protection Status